White 2" x 50' Single Jacket Mill Hose (Alum NPSH Couplings)

Description

Compatible Nozzle - 2 inch NPSH only
Hose Type - Polyester Single Jacket
Service Pressure - 125 psi
Proof Test Pressure - 250 psi
Not intended for structural firefighting. Single jacket and two inch hoses are never used in the fire service. Also, NH / NST is the most common thread in the fire service. Two inch NH / NST is a very rare thread and is often mistaken in place of 1 1/2 inch NH NST. Please be sure you are measuring the inside diameter of the male coupling.
NPSH Threads
The female side of a NPSH coupling will only connect to a male NPT pipe or a male NPSH connection
The male side of a NPSH coupling will only connect to a female NPSH connection.
It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.
Hoses with National Pipe Straight Hose Thread (NPSH or NPS) has the same threads per inch (TPI) as National Pipe Thread (NPT) but the threads do not taper. This allows a female coupling to thread onto a NPT fitting without being a permanent connection. For example, a female fire hose coupling with NPSH threads will only connect to a PVC pipe, metal pipe or couplings with NPSH or NPT threads. Fittings that are connected together by NPT by NPT require a sealing agent like pipe cement or teflon tape because the threads are making the seal and a permanent connection. When a female NPSH is threaded onto a male NPT fitting, it allows this connection to thread on and off frequently by using a gasket to seal.
We are a firefighter owned and operated company since 2011.
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.