Bowtie Emblem Overlay Decals 2 Vinyl Sheets Chevy Universal Cover DIY kit 19

Description

Read listing BEFORE placing order
What will you Receive?
You
will receive TWO (2)  VINYL SHEET that are Approximately 3 - 1/2" X 9 - 3/8" so you can apply the vinyl over your factory
emblem or use as a protector for your phone, etc. These are NOT a pre-cut shape. You will install them and cut them out so they fit perfect every time.
Why a sheet and not pre-cut shape?
These sheets are over-sized and are much easier to install than a pre-cut decal that has to be installed with 100% accuracy. With these all you have to do is install them and trim off the excess for a clean easy fit without fitment issues.
No need to modify or replace your bowtie emblem !
Safe for car washers and extreme weather, but can be removed without damage to vehicle.
Available in these colors:
BLACK, Silver, White, Pink, Dark Blue or RED
(buyer must make note in the “note to seller” box in paypal when checking out or black will be sent as default color)
Will fit the grille, Trunk/Hatch/Tailgate of virtually any Chevy vehicle.
This is
not
a replacement bowtie. It is not plastic, fiberglass or metal.  It is a vinyl sheet designed to be applied over the top of your factory emblem exactly as shown in the picture.  If you have questions about what you are buying, ask
before
ordering.
How to install:
1.    Clean vehicle surface thoroughly with soap and water or cleaner/degreaser, then again with rubbing alcohol to remove all wax.
2.    Measure to center and align decal. Install decal when temperature is above 50 degrees. Only apply decal to surface that is cool to touch. Not on hot surface or direct sun.
3.    Very slowly and carefully apply decal to vehicle surface.  Do not get in a hurry and risk damaging your decal.
4.    Apply pressure from the center out if there are any air bubbles. Any air bubbles can be removed with a needle/pin as a last resort if they cannot be removed with firm pressure from a squeegee.
5. Cut off the excess around the edges with an exacto knife or razor blade.
ATTENTION :  This is a vinyl sheet of automotive lettering vinyl, NOT a plastic, metal or fiberglass replacement emblem.   By clicking buy it now, you have confirmed that you have read this entire listing and understand what this item is and if you do not know what the item is, ask BEFORE buying.  Absolutely not refunds will be given for any reason, no exceptions.